Insert BOM Table
Description
Adds a Bill of Materials table to the drawing.
Parameters
General
| Parameter |
Type |
Description |
| Title |
Text box |
The title of the task |
Sheet Settings
| Parameter |
Type |
Description |
| Sheets to add BOM to |
Drop down box |
The sheets to which add BOM Table to |
| Sheet Names |
Text box |
The names of specific sheets on which to add model items (pipe bar delimited list) |
Template Settings
| Parameter |
Type |
Description |
| Use custom BOM template |
Checkbox |
If checked the BOM table will be created with a user defined template, otherwise will default to bom-standard.sldbomtbt template |
| Custom BOM Template |
File browser |
The custom BOM template file to use |
BOM Position Settings
| Parameter |
Type |
Description |
| Table anchor type |
Drop down box |
The corner of the BOM table that will be positioned to the specified anchor point |
| Use sheet anchor point |
Checkbox |
If checked the BOM table will be place on the anchor point defined in the sheet format |
| BOM Position X offset (mm) |
Numeric value |
The horizontal offset from the left edge of the sheet to the table anchor |
| BOM Position Y offset (mm) |
Numeric value |
The vertical offset from the bottom edge of the sheet to the table anchor |
BOM Table Settings
| Parameter |
Type |
Description |
| BOM Type |
Drop down box |
Specifies the type of the Bill of Materials table |
| Indented numbering type |
Drop down box |
Specifies the numbering type for the indented BOM table |
| Detailed cut list |
Checkbox |
If checked the indented BOM table will be include cut-list items of weldments or multi-body sheet metal parts |
Supported Document Types
Supported Processing Type
This task makes changes to the model
