Task based queuing for



Insert BOM Table


Adds a Bill of Materials table to the drawing.



Parameter Type Description
Title Text box The title of the task

Sheet Settings

Parameter Type Description
Sheets to add BOM to Drop down box The sheets to which add BOM Table to
Sheet Names Text box The names of specific sheets on which to add model items (pipe bar delimited list)

Template Settings

Parameter Type Description
Use custom BOM template Checkbox If checked the BOM table will be created with a user defined template, otherwise will default to bom-standard.sldbomtbt template
Custom BOM Template File browser The custom BOM template file to use

BOM Position Settings

Parameter Type Description
Table anchor type Drop down box The corner of the BOM table that will be positioned to the specified anchor point
Use sheet anchor point Checkbox If checked the BOM table will be place on the anchor point defined in the sheet format
BOM Position X offset (mm) Numeric value The horizontal offset from the left edge of the sheet to the table anchor
BOM Position Y offset (mm) Numeric value The vertical offset from the bottom edge of the sheet to the table anchor

BOM Table Settings

Parameter Type Description
BOM Type Drop down box Specifies the type of the Bill of Materials table
Indented numbering type Drop down box Specifies the numbering type for the indented BOM table
Detailed cut list Checkbox If checked the indented BOM table will be include cut-list items of weldments or multi-body sheet metal parts

Supported Document Types

  • Drawing (Lightweight)

Supported Processing Type

  • SolidWorks Application

This task makes changes to the model