Export Part As
Description
Exports the part to a different format
Parameters
General
Export Options
| Parameter |
Type |
Description |
| Override export settings |
Checkbox |
If checked, allows for the existing Export Options in System Settings to be overridden during file export. Settings will be restored to their original selections once the export is completed. NOTE: This option is only available for the Professional version of SolidQueue or above. |
| Export File Type |
Drop down box |
The file type to export |
Parasolid Export Options
| Parameter |
Type |
Description |
| Version |
Drop down box |
The solid/surface entity type to export |
| Flatten assembly hierarchy |
Checkbox |
Flattens the assembly hierarchy in the Parasolid output |
IGES Export Options
| Parameter |
Type |
Description |
| Export solid / surface entities |
Checkbox |
Specifies whether to export data as solid or surface entities |
| Solid / surface representation: |
Drop down box |
Specifies IGES representation type |
| Export wireframe (3D curves) |
Checkbox |
Specifies whether to convert solid body to a 3D wireframe representation in the IGES file |
| Wireframe (3D curve) representation: |
Drop down box |
Specifies the IGES curve representation |
| Surface representation / System preference: |
Drop down box |
Specifies the IGES system setting |
| Export 3D Curve features |
Checkbox |
Specifies whether to include 3D curve features in the exported file |
| Export sketch entities |
Checkbox |
Specifies whether to export sketch entities |
| Use high trim curve accuracy |
Checkbox |
Specifies whether to use high-trim curve accuracy |
| Save all components of an assembly in one file |
Checkbox |
Specifies whether to save all assembly components, sub-assemblies, and sub-assembly components in one file; for assemblies only |
| Flatten assembly hierarchy |
Checkbox |
Specifies whether to save assembly in flattened hierarchy (one level); for assemblies only |
| Split periodic faces |
Checkbox |
Specifies whether to split periodic faces; for parts only |
STEP Export Options
| Parameter |
Type |
Description |
| Output as |
Drop down box |
The geometry to export |
| Set STEP configuration data |
Checkbox |
Specifies whether to export STEP configuration data |
| Export face / edge properties |
Checkbox |
Specifies whether to export face and edge properties |
| Split periodic faces |
Checkbox |
Specifies whether to split periodic faces on export |
| Export 3D Curve features |
Checkbox |
Specifies whether to include 3D curve features in the exported file |
IFC Export Options
| Parameter |
Type |
Description |
| OmniClass |
Checkbox |
Output as OmniClass |
| Uniclass2015 |
Checkbox |
Output as Uniclass |
| Custom Properties |
Checkbox |
Exports custom properties |
| Material and Mass Properties |
Checkbox |
Exports material and mass properties |
| Units |
Drop down box |
The length units to export the document as |
| IFC4 Export |
Drop down box |
The export type for IFC4 files |
ACIS Export Options
| Parameter |
Type |
Description |
| Output as |
Drop down box |
The geometry to export |
| Version |
Drop down box |
The version to export |
| Units |
Drop down box |
The length units to export the document as |
| Export face / edge properties |
Checkbox |
Specifies whether to export face and edge properties |
| Split periodic faces |
Checkbox |
Specifies whether to split periodic faces on export |
| Write multi body part into a single ACIS Body |
Checkbox |
Combines a multi body part into a single ACIS body |
VRML Export Options
| Parameter |
Type |
Description |
| Version |
Drop down box |
The version to export |
| Units |
Drop down box |
The length units to export the document as |
| Save all components of an assembly in one file |
Checkbox |
Specifies whether to save all of the components of an assembly to a single VRML (.wrl) file |
STL Export Options
| Parameter |
Type |
Description |
| Output as |
Drop down box |
The data storage method in the STL file |
| Units |
Drop down box |
The length units to export the document as |
| Resolution |
Drop down box |
The tessellation quality of the STL file |
| Do not translate STL output data to positive space |
Checkbox |
Specifies whether exported parts maintain original position in global space, relative to origin |
| Save all components of an assembly in a single file |
Checkbox |
Specifies whether to save the assembly and its components to a single file |
| Check for interferences |
Checkbox |
Specifies whether to check for interference prior to saving assembly document; 'Save all components of an assembly in a single file' must be checked |
eDrawings Export Options
| Parameter |
Type |
Description |
| Allow Measurement |
Checkbox |
Enables measurement of the document in the eDrawings viewer |
| Allow Export To STL |
Checkbox |
Enables export of the document to STL in the eDrawings viewer |
| Save Table Features |
Checkbox |
If checked then includes table information (such as BOM) in the eDrawings document |
| Save Motion Studies |
Checkbox |
If checked then includes motion studies in the eDrawings document (this may increase file creation time and size) |
| Motion Study Configurations |
Drop down box |
Select if only the last calculated configuration, or all configurations should contain motion studies in the eDrawings document |
| Recalculate Motion Study |
Checkbox |
If checked then recalculates the motion study if the results are out of date |
PDF Export Options
| Parameter |
Type |
Description |
| Export PDF in colour |
Checkbox |
Specifies whether to save documents in color when saving to PDF |
| Embed fonts |
Checkbox |
Specifies whether to embed fonts when saving documents to PDF |
| High quality lines |
Checkbox |
Specifies whether to save drawing documents in high quality when saving to PDF |
| Shaded / Draft geometry DPI |
Drop down box |
For drawings only; controls dots per inch (DPI) setting for shaded and draft geometry; increased value improves quality while increasing the file size and the time to save the file |
| Sharpened OLE DPI |
Drop down box |
For drawings only; controls DPI setting for Object Linking and Embedding (OLE) objects; increased value improves quality while increasing the file size and the time to save the file |
| Print header / footer |
Checkbox |
Specifies whether to use the header and footer specified in File > Print > Header Footer when saving documents to PDF |
| Use specified printer line weights (File, Print, Line Weights) |
Checkbox |
Specifies whether to use the default printer line weights when saving documents to PDF |
| Include layers set to not print |
Checkbox |
Specifies whether to include layers set not to print |
3D PDF Export Options
| Parameter |
Type |
Description |
| Accuracy |
Drop down box |
The accuracy of the 3D PDF |
| Use Lossy compression on tessellation |
Checkbox |
Specifies whether to use lossy compression on tessellation |
Image Export Options
| Parameter |
Type |
Description |
| Image Type |
Drop down box |
The type of image to export |
| Capture Type |
Drop down box |
The type of capture to export |
| JPG Compression |
Slider |
The compression to use. 1 is for lowest compression (highest quality), 100 is for the highest compression (lowest quality) |
| Compression Scheme |
Drop down box |
The compression scheme to use when saving the Tiff image |
| Print Capture DPI |
Drop down box |
The dots per inch (DPI) at which to export the print capture |
| Paper size |
Drop down box |
The paper size at which to export the print capture |
| Width |
Numeric value |
The print capture width |
| Height |
Numeric value |
The print capture height |
Supported Document Types
Supported Processing Type
This task can be run on all configurations of the model
This task does not make changes to the model
